Graphene quantum dots on TiO2 nanotubes as a light-assisted peroxidase nanozyme.

Hybrid nanozyme graphene quantum dots (GQDs) deposited TiO2 nanotubes (NTs) on titanium foil (Ti/TiO2 NTs-GQDs) were manufactured by bestowing the hybrid with the advantageous porous morphology, surface valence states, high surface area, and copious active sites. The peroxidase-like activity was investigated through the catalytic oxidation of chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2, which can be visualized by the eyes. TiO2 NTs and GQDs comprising oxygen-containing functional groups can oxidize TMB in the presence of H2O2 by mimicking peroxidase enzymes. The peroxidase-mimicking activity of hybrid nanozyme was significantly escalated by introducing light illumination due to the photosensitive features of the hybrid material. The peroxidase-like activity of Ti/TiO2 NTs-GQDs enabled H2O2 determination over the linear range of 7 to 250 µM, with a LOD of 2.1 µM. The satisfying peroxidase activity is possibly due to the unimpeded access of H2O2 to the catalyst's active sites. The porous morphology provides the easy channeling of reactants and products. The periodic structure of the material also gave rise to acceptable reproducibility. Without material functionalization, the Ti/TiO2 NTs-GQDs can be a promising substitute for peroxidases for H2O2 detection.

Plasmon-enhanced fluorescence combined with aptamer sensor based on Ag nanocubes for signal-amplified detection of berberine hydrochloride.

Plasmon enhanced fluorescent (PEF) with more "hot spots" play a critical role in signal amplified technology to avoid the intrinsic limitation of fluorophore which ascribed to a strong electromagnetic field at the tip structure. However, application of PEF technique to obtain a highly sensitive analysis of medicine was still at a very early stage. Herein, a simple but versatile Ag nanocubes (Agcubes)-based PEF sensor combined with aptamer (Agcubes@SiO2-QDs-Apt) was proposed for highly sensitive detection of berberine hydrochloride (BH). The distance between the plasma Agcubes and the red-emitted CdTe quantum dots (QDs) were regulated by the thickness of silica spacer. The three-dimensional finite-difference time-domain (3D-FDTD) simulation further revealed that Agcubes have a higher electromagnetic field than Ag nanospheres. Compared with PEF sensor, signal QDs-modified aptamer without Agcubes (QDs-Apt) showed a 10-fold higher detection limit. The linear range and detection limit of the Agcubes@SiO2-QDs-Apt were 0.1-100 µM, 87.3 nM, respectively. Furthermore, the PEF sensor was applied to analysis BH in the berberine hydrochloride tablets, compound berberine tablet and urine with good recoveries of 98.25-102.05%. These results demonstrated that the prepared PEF sensor has great potential for drug quality control and clinical analysis.

A smartphone-assisted fluorescent sensing platform for ochratoxin A using Mn-doped CsPbBr3 perovskite quantum dots embedded in the mesoporous silica as a ratiometric probe.

Food sources are susceptible to contamination with ochratoxin A (OTA), which is a serious threat to human health. Thus, the construction of novel, simple sensing platforms for OTA monitoring is of utmost need. Manganese-doped lead halide perovskite quantum dots encapsulated with mesoporous SiO2 (Mn-CsPbBr3 QDs@SiO2) were prepared here and used as a ratiometric fluorescent probe for OTA. Mn-CsPbBr3 QDs, synthesized at room temperature, exhibit dual emission with maximum wavelengths of 440 and 570 nm and, when embedded in the SiO2 layer, produce a stable and robust photoluminescence signal. By adding OTA to the probe, emission at 440 nm increases while emission at 570 nm decreases, so a ratiometric response is obtained. Experimental variables affecting the probe signal were studied and optimized and the mechanism of sensing was discussed. This ratiometric sensor demonstrated excellent selectivity and low detection limit (4.1 ng/ml) as well as a wide linear range from 5.0 to 250 ng/ml for OTA. A simple portable smartphone-based device was also constructed and applied for the fluorescence assay. With different OTA concentrations, the multicolor transition from pink to blue under a UV lamp led to simple visual and smartphone-assisted sensing of OTA by using a color analyzing application. Satisfactory recoveries in black tea, coffee, moldy fig and flour samples confirmed the reliability of the assay. The accuracy of the probe was proved by comparison of the results with high-performance liquid chromatography (HPLC).

Determination of carbohydrate content in kenaf degumming wastewater and converting them to carbon dots.

The traditional textile degumming process produces abundant wastewater, which contains a lot of monosaccharides and oligosaccharides. It is of great economic and environmental significance to utilize these carbohydrates in high value. In this study, high performance liquid chromatography (HPLC) was used to analyze the carbohydrate components in kenaf degumming wastewater, and then the production of C-dots using the wastewater was explored. The results showed that the types and content in the degumming wastewater were monosaccharides (glucose, xylose and arabinose) and oligosaccharides (dextran, xylan and araban). The carbohydrate (mainly glucan and xylan) content in wastewater accounted for 91.16 % of the total carbohydrates weight loss in kenaf degumming process. By using hydrolysis and hydrothermal reaction on kenaf degumming wastewater, blue-green carbon dots (C-dots) with good performance were prepared and successfully applied to anti-counterfeiting printing. In particular, the as-prepared C-dots prepared from kenaf degumming wastewater with urea added (WUC-dots) showed an excitation-dependent photoluminescence (PL) spectrum and quantum yield (QY) of 2.4 % in aqueous solution. The fluorescent code exhibited a clear outline, excitation-tunable color and good stability, showing a great potential for anti-counterfeiting system.

Preparation of lignin-based full-color carbon quantum dots and their multifunctionalization with waterborne polyurethanes.

Lignin is a popular material for energy transition and high-value utilization due to its low cost, non-toxicity, renewability, and widespread availability. However, its complex structure has hindered its application. Waterborne polyurethane (WPU) uses water as a dispersion medium, which is safer for humans and the environment but also leads to disadvantages such as poor mechanical properties and water resistance. In this study, we prepared multicolor photoluminescent carbon quantum dots (CQDs) in a wide range of wavelengths from lignin. We successfully prepared panchromatic CQDs by additive mixing. The redshift of the emission wavelength is attributed to the synergistic effect of the sp2 conjugated structure and the surface functional groups. The full-color solid-state luminescence of the CQDs was successfully achieved, and most importantly, the application of full-color CQDs in light-emitting diodes was realized. Moreover, the embedding of the multicolor CQDs in WPU not only makes WPU luminescent but also improves the water resistance and mechanical properties of WPUs. The hydrogen-bonding interactions between the functional groups on the surface of the CQDs and the urethane were responsible for the high performance of the composite. We investigated the UV and strong blue light shielding abilities of WPU/yellow CQDs films, which resulted from the unique absorption peaks of yellow CQDs in the UV region and the strong blue light region. This work provides an efficient method for the high-value utilization of biomass materials and paves the way for the multifunctional application of WPU.

Applications of Quantum Dots in Preventive Oncology.

QDs are semiconductor nanocrystalline materials with distinct optical and electronic characteristics due to their microscopic size and quantum mechanical properties. They are often composed of materials such as cadmium selenide (CdSe), cadmium telluride (CdTe), or indium phosphide (InP) and are typically in the size range of 2 to 10 nanometers in diameter. These tiny particles are used in various scientific and technological applications. Some key characteristics and applications of quantum dots are size-dependent Optical Properties with tunable emission. The color of light emitted by quantum dots highly depends on their size. Smaller QDs emit blue or green light, while larger ones emit red or near-infrared light. This tunability makes them valuable in various applications, especially in molecular medicine and oncology research. Quantum dots can exhibit a high quantum yield, meaning they efficiently emit light when excited, making them excellent fluorescent probes for non-invasive imaging. This review discusses the applications of QDs and their role in biomedical research and patient care, focusing on non-invasive imaging and preventive oncology.

Fluorescent responsive membrane based on terbium coordination polymer and carbon dots with AIE effect for rapid and visual detection of fluoroquinolone.

In this study, based on aggregation-induced emission (AIE) effect and antenna effect, a novel portable fluorescent responsive membrane was constructed with red carbon dots (R-CDs) as reference signal and terbium coordination polymer (Tb-AMP CPs) as response signal for visual, instrument-free, and sensitive detection of fluoroquinolones (FQs). Specifically, the fluorescent responsive membrane (R-T membrane) was prepared by physically depositing R-CDs with AIE property and Tb-AMP CPs on the surface of polyvinylidene fluoride filter membranes at ambient temperature. In the presence of FQs, Tb3+ in the Tb-AMP CPs of the prepared membrane coordinated with the ß-diketone structure of FQs, which turned on the yellow-green fluorescence through the "antenna effect". As the concentration of FQs increased, the R-T membrane achieved a fluorescent color transition from bright pink to yellow-green. Its visual detection sensitivity for three FQs, including ciprofloxacin, difloxacin, and enrofloxacin, was 0.01 µM, and the detection limits were 7.4 nM, 7.8 nM, and 9.2 nM, respectively, by analyzing the color parameter green. In the residue analysis of FQs in real samples, the constructed membrane also exhibited remarkable anti-interference and reliability, which is of great significance for ensuring the safety of animal-derived food.

Recent advances in biomedical applications of carbon and graphene quantum dots: A review.

The carbon-based nanostructures have led to the development of theranostic nanoplatforms for simultaneous diagnosis and therapy due to their effective cell membrane-penetration ability, low degree of cytotoxicity, excellent pore volume, substantial chemical stability, and reactive surface. In the last few years, extensive efforts were made to design multifunctional nanoplatform strategies based on carbon nanostructures, involving multimodal imaging, controlled drug release capabilities, sensing in vitro, efficient drug loading capacity, and therapy. Carbon and graphene quantum dots (CQDs and GQDs) were the recent entrants, contingently being assessed for drug delivery and bioimaging. With the advancements, these quantum dots have ignited remarkable research interest and are now widely evaluated for diagnosis, bioimaging, sensing, and drug delivery applications. The last decade has witnessed their remarkable electrical, optical, and biocompatible properties since their inception. It is presumed that both of them have high potential as drug carriers and would serve as the next generation of approaches to address numerous unresolved therapeutic challenges. This review examined the recent advances of CQD and GQD based drug delivery applications, challenges, and future perspectives to pave the way for further studies in the future.

Enhanced metal-free photocatalyst performance by synergistic Coupling of internal magnetic field and piezoelectric field.

Graphitic carbon nitride (g-C3N4) is a promising metal-free photocatalyst; however, its high carrier recombination rate and insufficient redox capacity limit its degradation effect on antibiotics. In order to overcome these shortcomings, the photocatalytic activity is improved by regulating the spin polarization state, constructing the internal electric field, and applying the external piezoelectric field. In this paper, the chlorine-doped and nitrogen-deficient porous carbon nitride composite carbon quantum dots (Nv-Cl/UPCN@CQD) has been synthesized successfully. The doping position of chlorine and spin polarization properties are verified by DFT calculation. The key intermediates *O2- and *OOH for the synthesis of reactive oxygen species were detected by in-situ infrared testing, which promotes the production of •O2- and H2O2. The degradation rate constant of Nv-Cl/UPCN@CQD for removal of tetracycline is 8.45 times higher than that of g-C3N4. The active oxygen production and degradation efficiency of piezoelectric photocatalysis under the synergistic effect of intense stirring and vis-light irradiation are much higher than those of photocatalysis and piezoelectric catalysis, and the conversion of H2O2 to •OH is promoted by piezoelectric field. This paper provides a reliable way to improve the performance of piezoelectric photocatalysts by adjusting their energy band, electronic structure and piezoelectric force.

Quantum dots: a next generation approach for pathogenic microbial biofilm inhibition; mechanistic insights, existing challenges, and future potential.

Quantum Dots (QDs) have emerged as versatile nanomaterials with origins spanning organic, inorganic, and natural sources, revolutionizing various biomedical applications, particularly in combating pathogenic biofilm formation. Biofilms, complex structures formed by microbial communities enveloped in exopolysaccharide matrices, pose formidable challenges to traditional antibiotics due to their high tolerance and resistance, exacerbating inefficacy issues in antibiotic treatments. QDs offer a promising solution, employing physical mechanisms like photothermal or photodynamic therapy to disrupt biofilms. Their efficacy is noteworthy, with lower susceptibility to resistance development and broad-spectrum action as compared to conventional antibiotic methods. The stability and durability of QDs ensure sustained biofilm activity, even in challenging environmental conditions. This comprehensive review delves into the synthesis, properties, and applications of Carbon Quantum Dots (CQDs), most widely used QDs, showcasing groundbreaking developments that position these nanomaterials at the forefront of cutting-edge research and innovation. These nanomaterials exhibit multifaceted mechanisms, disrupting cell walls and membranes, generating reactive oxygen species (ROS), and binding to nucleic materials, effectively inhibiting microbial proliferation. This opens transformative possibilities for healthcare interventions by providing insights into biofilm dynamics. However, challenges in size control necessitate ongoing research to refine fabrication techniques, ensure defect-free surfaces, and optimize biological activity. QDs emerge as microscopic yet potent tools, promising to contribute to a brighter future where quantum wonders shape innovative solutions to persistently challenging issues posed by pathogenic biofilms. Henceforth, this review aims to explore QDs as potential agents for inhibiting pathogenic microbial biofilms, elucidating the underlying mechanisms, addressing the current challenges, and highlighting their promising future potential.

Construction Strategy and Mechanism of a Novel Wood Preservative with Excellent Antifungal Effects.

Wood is a naturally porous material prone to microbial erosion and degradation in outdoor environments. Therefore, the development of an environmentally friendly wood preservative with excellent antibacterial effects and low toxicity is urgently needed. In this study, nitrogen-doped carbon quantum dots (N-CQDs) with excellent antifungal performance and fluorescent properties were synthesized using a one-step hydrothermal method with chitosan quaternary ammonium salt (HACC) as the raw material. The fluorescence characteristics of N-CQD preservatives can help track their position and distribution in wood. The minimum inhibitory concentration (MIC) of N-CQDs is 1.8 mg/mL, which was nearly 22 times lower than that of HACC (40.0 mg/mL) in the PDA medium. The decay resistance test demonstrated that wood treated with N-CQDs showed a considerably reduced decay degree and its mass loss rate decreased from 46 ± 0.5% to 3.8 ± 0.5%. Biological transmission electron microscopy revealed that N-CQDs effectively destroyed fungal cell structures, thereby hindering the growth of Coriolus versicolor. N-CQDs synthesized using the one-step hydrothermal method can be used as an efficient wood preservative that can effectively improve the utilization and service life of wood.

Utilization of Nitrogen-Doped Graphene Quantum Dots to Neutralize ROS and Modulate Intracellular Antioxidant Pathways to Improve Dry Eye Disease Therapy.

Purpose: Patients afflicted with dry eye disease (DED) experience significant discomfort. The underlying cause of DED is the excessive accumulation of ROS on the ocular surface. Here, we investigated the nitrogen doped-graphene quantum dots (NGQDs), known for their ROS-scavenging capabilities, as a treatment for DED. Methods: NGQDs were prepared by using citric acid and urea as precursors through hydrothermal method. The antioxidant abilities of NGQDs were evaluated through: scavenging the ROS both extracellular and intracellular, regulating the nuclear factor-erythroid 2-related factor (Nrf2) antioxidant pathway of human corneal epithelial cells (HCECs) and their transcription of inflammation related genes. Furthermore, NGQDs were modified by Arg-Gly-Asp-Ser (RGDS) peptides to obtain RGDS@NGQDs. In vivo, both the NGQDs and RGDS@NGQDs were suspended in 0.1% Pluronic F127 (w/v) and delivered as eye drops in the scopolamine hydrobromide-induced DED mouse model. Preclinical efficacy was compared to the healthy and DPBS treated DED mice. Results: These NGQDs demonstrated pronounced antioxidant properties, efficiently neutralizing free radicals and activating the intracellular Nrf2 pathway. In vitro studies revealed that treatment of H2O2-exposed HCECs with NGQDs induced a preservation in cell viability. Additionally, there was a reduction in the transcription of inflammation-associated genes. To prolong the corneal residence time of NGQDs, they were further modified with RGDS peptides and suspended in 0.1% Pluronic F127 (w/v) to create RGDS@NGQDs F127 eye drops. RGDS@NGQDs exhibited superior intracellular antioxidant activity even at low concentrations (10 µg/mL). Subsequent in vivo studies revealed that RGDS@NGQDs F127 eye drops notably mitigated the symptoms of DED mouse model, primarily by reducing ocular ROS levels. Conclusion: Our findings underscore the enhanced antioxidant benefits achieved by modifying GQDs through nitrogen doping and RGDS peptide tethering. Importantly, in a mouse model, our novel eye drops formulation effectively ameliorated DED symptoms, thereby representing a novel therapeutic pathway for DED management.

Highly fluorescent nitrogen-doped carbon quantum dots prepared using sucrose and urea: Green synthesis, characterization, and use for determination of torsemide in its tablets and plasma samples.

A simple and facile microwave-assisted method was developed for the synthesis of highly fluorescent nitrogen-doped carbon quantum dots (N-CQDs) using sucrose and urea. The produced quantum dots exhibited a strong emission band at 376 nm after excitation at 216 nm with quantum yield of 0.57. The as-prepared N-CQDs were characterized using Fourier-transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) images, and ultraviolet-visible (UV-visible) spectra. The average particle size was 7.7 nm. It was found that torsemide (TRS) caused an obvious quenching of the fluorescent N-CQDs; so, they were used for its spectrofluorometric estimation. An excellent linear correlation was found between the fluorescence quenching of N-CQDs and the concentration of the drug in the range of 0.10 to 1.0 µg/mL with limit of quantitation (LOQ) of 0.08 µg/mL and limit of detection (LOD) of 0.027 µg/mL. The method was successfully applied for the assay of the drug in its commercial tablets and spiked human plasma samples, and the results obtained were satisfactory. Complex GAPI was used for greenness assessment of the analytical procedures and the pre-analysis steps. Interference likely to be introduced from co-administered drugs was also studied.

Investigating the effect of Zn doping and temperature on the photoluminescence behaviour of CuLaSe2 quantum dots.

In this study, CuLaSe2 and ZnCuLaSe2 quantum dots (QDs) with a mean size of ~4 nm were synthesized and characterized, and their temperature-dependent photoluminescence (PL) properties were studied in the temperature range from 90 to 300 K for the first time. The results show that the obtained QDs were spherical and revealed excitonic band gaps. The PL intensity for both types of materials decreased when increasing the temperature to 300 K, which was attributed to the nonradiative relaxation and thermal escape mechanisms. As the temperature was increased, the PL linewidths broadened, and PL peak energies were red shifted for both types of QDs due to the exciton-phonon coupling and lattice deformation potential mechanisms. In addition, we found that as the temperature was decreased, the PL spectrum of ZnCuLaSe2 QDs contained two extra components, which could be attributed to the shallow defect sites (low energy peak) and the crystal phase transition process (high energy peak). The spectrum of CuLaSe2 QDs contained one extra component, which could be attributed to the crystal phase transition process.

Facile synthesis of Gd/Ru-doped fluorescent carbon dots for fluorescent/MR bimodal imaging and tumor therapy.

Functional metal doping endows fluorescent carbon dots with richer physical and chemical properties, greatly expanding their potential in the biomedical field. Nonetheless, fabricating carbon dots with integrated functionality for diagnostic and therapeutic modalities remains challenging. Herein, we develop a simple strategy to prepare Gd/Ru bimetallic doped fluorescent carbon dots (Gd/Ru-CDs) via a one-step microwave-assisted method with Ru(dcbpy)3Cl2, citric acid, polyethyleneimine, and GdCl3 as precursors. Multiple techniques were employed to characterize the morphology and properties of the obtained carbon dots. The Gd/Ru-CDs are high mono-dispersity, uniform spherical nanoparticles with an average diameter of 4.2 nm. Moreover, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) confirmed the composition and surface properties of the carbon dots. In particular, the successful doping of Gd/Ru enables the carbon dots not only show considerable magnetic resonance imaging (MRI) performance but also obtain better fluorescence (FL) properties, especially in the red emission area. More impressively, it has low cytotoxicity, excellent biocompatibility, and efficient reactive oxygen species (ROS) generation ability, making it an effective imaging-guided tumor treatment reagent. In vivo experiments have revealed that Gd/Ru-CDs can achieve light-induced tumor suppression and non-invasive fluorescence/magnetic resonance bimodal imaging reagents to monitor the treatment process of mouse tumor models. Thus, this simple and efficient carbon dot manufacturing strategy by doping functional metals has expanded avenues for the development and application of multifunctional all-in-one theranostics.

Functional carbon dots-hydrogel complex for selective antibacterial and detection applications.

The carbon dots (CDs) with excellent optical properties and their hydrogel complex are of great significance in biomedicine, healthcare and biochemical detection fields. This paper reports the preparation of green-emitting CDs (MA-CDs) through one-step hydrothermal route with citric acid as reducing agent, L-malic acid as carbon source and N-(2-hydroxyethyl)ethylenediamine as nitrogen source. To expand its application in biology, MA-CDs were coupled with vancomycin to obtain multifunctional CDs (VMA-CDs). The prepared VMA-CDs exhibit selective antibacterial behavior to Gram-positive bacteria, and it could be used as a fluorescent probe to selectively label Staphylococcus aureus (S. aureus). Moreover, thanks to the excellent optical properties of VMA-CDs, it has been used as a fluorescent sensor to detect Au3+ with detection range of 6.50 nM-21.93 µM and detection limit 3.98 nM. By introducing the fluorescence of CDs as the reference signal, and VMA-CDs as a response signal, the hydrogel (V-SP) was prepared and realized the detection of Au3+ in microfluidics with assistance of a smartphone to collect and analyze data.

Novel fluorescent probes based on sulfur and nitrogen co-doped carbon dots for determination of three N-substituted phenothiazine derivatives in dosage forms.

In the current work, sulfur and nitrogen co-doped carbon dots (S,N-CDs) as simple, sensitive, and selective turn-off fluorescent nanosensors were utilized for analysis of three phenothiazine derivatives, including acetophenazine (APZ), chlorpromazine (CPH), and promethazine (PZH). S,N-CDs were synthesized through a green one-pot microwave-assisted technique using widely available precursors (thiourea and ascorbic acid). HRTEM, EDX, FTIR spectroscopy, UV-Vis absorption spectroscopy, and fluorescence spectroscopy were used to characterize the as-synthesized CDs. When excited at 330 nm, the carbon dots produced a maximum emission peak at 410 nm. The cited drugs statically quenched the S,N-CDs fluorescence as revealed by the Stern-Volmer equation. The current method represents the first spectrofluorimetric approach for the determination of the studied drugs without the need for chemical derivatization or harsh reaction conditions. The importance of the proposed work is magnified as the cited drugs do not have any fluorescent properties. The fluorescence of the developed sensor exhibited a linear response to APZ, CPH, and PZH in the concentration ranges of 5.0-100.0, 10.0-100.0, and 10.0-200.0 µM with detection limits of 1.53, 1.66, and 2.47 µM, respectively. The developed fluorescent probes have the advantages of rapidity and selectivity for APZ, CPH, and PZH analysis in tablets with acceptable % recoveries of (98.06-101.66 %). Evaluation of the method's greenness was performed using the Complementary Green Analytical Procedure Index (ComplexGAPI) and Analytical GREEnness metric (AGREE) metrics, indicating that the method is environmentally friendly. Validation of the proposed method was performed according to ICHQ2 (R1) guidelines.

Sulfur quantum dots as sustainable materials for biomedical applications: Current trends and future perspectives.

Discovered over a decade ago, sulfur quantum dots (SQDs) have rapidly emerged as a sustainable, safe, and inexpensive quantum material. Sustainably synthesizing SQDs using sublimed sulfur powders, typically produced as waste in industrial petrochemical refining processes, has attracted researchers to use these functional quantum materials in various research fields. SQDs quickly found applications in various research fields, such as electronics, environmental sensing, food packaging, and biomedical engineering. Although low production yields, time-consuming and energy-intensive synthetic methods, and low photoluminescence quantum yield (PLQY) have been some problems, researchers have found ways to improve synthetic methods, develop passivating agents, and systematically modify reaction schemes and energy sources to achieve large-scale synthesis of stable SQDs with high PLQY. Nonetheless, SQDs have succeeded tremendously in biomedical and related applications due to their low toxicity, antibacterial and antioxidant properties, biocompatibility, appropriate cellular uptake, and photoluminescent properties. Although the bioimaging applications of SQDs have been extensively studied, their other reported properties indicate their suitability for use as antimicrobial agents, free radical scavengers, and drug carriers in other biomedical applications, such as tissue regeneration, wound healing, and targeted drug delivery.

Versatile Prepolymer Platform for Controlled Tailoring of Quantum Dot Surface Properties.

Quantum dots (QDs) hold immense promise for bioimaging, yet technical challenges in surface engineering limit their wider scientific use. We introduce poly(pentafluorophenyl acrylate) (PPFPA) as a user-friendly prepolymer platform for creating precisely controlled multidentate polymeric ligands for QD surface engineering, accessible to researchers without extensive synthetic expertise. PPFPA combines the benefits of both bottom-up and prepolymer approaches, offering minimal susceptibility to hydrolysis and side reactions for controlled chemical composition, along with simple synthetic procedures using commercially available reagents. Live cell imaging experiments highlighted a significant reduction in nonspecific binding when employing PPFPA, owing to its minimal hydrolysis, in contrast to ligands synthesized by using a conventional prepolymer prone to uncontrolled hydrolysis. This observation underscores the distinct advantage of our prepolymer system. Leveraging PPFPA, we synthesized biomolecule-conjugated QDs and performed QD-based immunofluorescence to detect a cytosolic protein. To effectively label cytosolic targets in such a dense and complex environment, probes must exhibit minimal nonspecific binding and be compact. As a result, QD-immunofluorescence has focused primarily on cell surface targets. By creating compact QD-F(ab')2, we sensitively detected alpha-tubulin with a ∼50-fold higher signal-to-noise ratio compared to organic dye-based labeling. PPFPA represents a versatile and accessible platform for tailoring QD surfaces, offering a pathway to realize the full potential of colloidal QDs in various scientific applications.

Low-energy-consumption rapid synthesis of carbon dots at room temperature from combusted food waste with versatile analytical applications.

In this study, we developed a low-energy-consumption green method for synthesising carbon dots (CD) at room temperature using watermelon rind as the carbon source through a cutting process based on NaCl crystals. The synthesis process was rapid (<5 min) and facile. The synthesised CD were characterised using photoluminescence (PL) spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, energy-dispersive X-ray analysis and X-ray photoelectron spectroscopy. The results revealed that the synthesised dots exhibited robust adsorption, a spherical shape and a uniform size distribution. The PL intensity of the quantum dots decrease due to the temperature rising, metal ions and ponceau 4R added. In contrast with PH, PL intensity increase, so these CD can serve as multifunctional sensing materials. Overall, this study presents an environmentally friendly method for the rapid synthesis of CD that are suitable for temperature, pH, metal ion and food sensing applications.